Why is My Furnace Blowing Cold Air?

Check your Thermostat
Make sure your thermostat is set on the correct setting. If it is set to “ON” the blower will run constantly even when the furnace isn’t heating any air. And the air that comes through the vents will seem cool because it is room temperature air. Turn your thermostat to “AUTO”, now the fan will only run when the furnace is heating and you won’t get tepid or room temperature air.

Change the Air Filter
A dirty air filter will restrict the air flow in and out of your furnace which can cause it to overheat. If your furnace overheats, the safety control will shut off the burners causing the fan to blow cool air versus heated air through the house.

Check the Pilot Light
Your furnace may be blowing cold air because the pilot light has gone out. It is a simple fix, just relight the pilot. If it continues to go out after you relight it a few times, then you should call us at (615) 824-8098 or request service online. This is indicative of a bigger problem that requires professional help.

Reboot Your System
If you have a modern furnace, you probably have one that is controlled by a computer. Sometimes there is simply a glitch in the system and it needs a simple reset, the same way you would restart your computer or phone. If you turn off your furnace for 30 seconds and then back on, it may reset itself and begin functioning correctly. If it doesn’t start working the way it should after you have restarted the computer then contact us today.

Ductwork
The older you ductwork is, the more likely it is to be damaged or leaky. If you have a damaged or leaky ductwork air can be escaping before it gets to the desired living areas. Inspect the ductwork yourself, but its possible that you may not be able to visually detect the rips or tears that are causing your leak. Please call us at (615) 824-8098 or request service online for an in depth ductwork inspection.


Kimbro Air proudly provides HVAC service to Hendersonville, Nashville, Bellevue, Bordeaux, Brentwood, Franklin, Gallatin, Goodlettsville, Hermitage, Madison, Mt. Juliet, White House and the surrounding communities. Visit our service area page for more coverage details, call us at 615-527-8576, or request service online today.

You May Also Like

Commercial HVAC System Upgrade in Nashville, TN
March 21, 2024

5 Reasons to Upgrade Your Commercial HVAC System in Nashville, TN

If your Nashville, TN, commercial HVAC system is nearing the end of its lifespan and costing you more in repairs, it might… Continue Reading 5 Reasons to Upgrade Your Commercial HVAC System in Nashville, TN

Read More…

IAQ Solutions in Gallatin, TN
February 7, 2024

Do You Need IAQ Solutions in Gallatin, TN?

Indoor air quality (IAQ) is one of the most important aspects of home comfort in Gallatin, TN. While improving IAQ can always… Continue Reading Do You Need IAQ Solutions in Gallatin, TN?

Read More…

Frozen Heat Pump in Hendersonville, TN
January 2, 2024

3 Causes of a Frozen Heat Pump in Hendersonville, TN

The winter chill in Hendersonville, TN presents enough problems on its own without freezing your heat pump. But if your system does… Continue Reading 3 Causes of a Frozen Heat Pump in Hendersonville, TN

Read More…

Compliance Settings
Increase Font Size
Grayscale
Simplified Font
Underline Links
Highlight Links
Reset
Close