What Does AFUE Mean?

While an air conditioner’s efficiency is measured by its SEER (Seasonal Energy Efficiency Ratio) rating, an electric or gas- or oil-fired furnace’s efficiency is measured by its AFUE, or Average Fuel Utilization Efficiency. This standard measurement is given in percentages, letting you know how much of your fuel is actually used to heat your home and much fuel is wasted. The higher the AFUE rating, the more efficient the unit is.

Typically the ratings or percentages you’ll see on new furnaces range from 80 to 100 percent (contingent upon the fuel type of furnace being rated). If a furnace has an AFUE of 80 percent, this means the furnace converts 80 percent of the fuel to heat your house, while the remaining 20 percent is lost, usually out the chimney.

How to Use AFUE When Purchasing a New Furnace

Keep in mind that AFUE is only the efficiency of that furnace to convert fuel into heat. The higher the number, the better it is at that conversion. So, yes, that will save in energy costs. But the higher-efficiency furnaces also cost more than their lower-efficiency comrades. That’s something you need to be mindful of when new-furnace shopping. You need to weigh these factors against one another, as well as the cost of your type of furnace fuel, when looking to make that decision. Our technicians at Kimbro Air here in Hendersonville are experts at factoring all these components into the best recommendations for a new furnace for you. Call us any time for an appointment.

In general, the type of fuel your furnace uses is more important in determining the optimal furnace for your home than the AFUE is. Fuels such as gas, propane, and electric vary greatly in cost and need to be one of the first decisions you make when it comes to purchasing a new furnace. Once you’ve decided which fuel you’ll be using (you may opt to change your fuel source from your present one when upgrading), then compare the AFUE ratings on furnaces with that fuel source.

Don’t compare an electric furnace’s AFUE to a gas furnace’s rating, they are totally different. And as mentioned above, if you’re doing a cost analysis on your upcoming furnace purchase, be sure to factor the fuel costs into your analysis. Even though an electric furnace may have an AFUE rating of 100 percent, the cost of electricity is higher than gas. So while the gas-furnace’s AFUE rating of 96 percent indicates it’s more costly in its efficiency than the electric furnace, it’s actually be cheaper for you to go with the gas furnace due to the high cost of electricity.

Questions to Ask When Furnace Shopping

What are my long-term goals for my home?
If you’re only staying in your home for a few years, then purchasing a furnace with a lower AFUE may be the way to go. It will cost less, and there’s no way to recoup the price difference between a higher-efficiency unit and the energy-costs saved in just a couple years. If you’re planning on retiring in this home, then you would definitely recoup that cost and go on to save more with your energy bills throughout the years.
What type of furnace fuel will I use?
This question may be determined by your home’s location––suburban area vs. rural area, city and state vs. other cities and states. Call Kimbro Air for answers to what’s most used here in Hendersonville. Also, call around for various fuel pricing. Just because you have a specific-fueled furnace now doesn’t mean that it’s the most efficient now, fuel wise. You may find another even more cost effective.

Once you know the answers to these two questions, you can competently shop for your new furnace directly comparing AFUEs. Factor in your annual heating costs when comparing different furnaces with similar (or different) AFUEs, and you’ll have a sound process for helping you to decide the best furnace for your home and goals.

If you are in Hendersonville, Nashville or the surrounding communities, please call the HVAC experts at Kimbro Air or request service online. If you are not sure if you are covered by us, visit our service area page or call our office to find out what we can do for you.


Ballard Natural Gas Services is proud to offer services to Seattle, Shoreline, West Seattle, Capitol Hill, Lake Forest Park, Richmond Beach, Bellevue, Mercer Island, Edmonds, Mountlake Terrace and the surrounding communities. Call us at 206-784-8101 or request service online today!


Kimbro Air proudly provides HVAC service to Hendersonville, Nashville, Bellevue, Bordeaux, Brentwood, Franklin, Gallatin, Goodlettsville, Hermitage, Madison, Mt. Juliet, White House and the surrounding communities. Visit our service area page for more coverage details, call us at 615-527-8576, or request service online today.

You May Also Like

New Heat Pump in Gallatin, TN
September 24, 2021

Do I Need a New Heat Pump in Gallatin, TN?

A heat pump is among the most valuable purchases in your Gallatin, TN, home. Essentially, the heat pump has worked hard all… Continue Reading Do I Need a New Heat Pump in Gallatin, TN?

Read More…

HVAC Upgrades in Hendersonville, TN

How to Boost Home Value Through HVAC Upgrades in Hendersonville, TN

When selling your home in Hendersonville, TN, you need to make sure that you get a positive return on your investment by… Continue Reading How to Boost Home Value Through HVAC Upgrades in Hendersonville, TN

Read More…

HVAC Myths in Bellevue, TN
August 13, 2021

6 HVAC Myths to Stop Believing Today in Bellevue, TN

People will give you well-meaning advice about your HVAC system when you move into a new house, and you might have listened… Continue Reading 6 HVAC Myths to Stop Believing Today in Bellevue, TN

Read More…

Compliance Settings
Increase Font Size
Grayscale
Simplified Font
Underline Links
Highlight Links
Reset
Close